Breather tubes and plug?

Breather tubes and plug?

18 Nov. 2009 15:47
#39297
Hello, sorry for not speaking german.

Two short questions.

How are you gonna be able to reach the spark plug without removing the top of the cylinder?

How do you connect all the breather tubes and plugs to the carburator?

MfG
Olof

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Johannes
  • Johanness Avatar
  • Offline
  • Immer unterwegs
  • Beiträge: 1988

Re: Re: Breather tubes and plug?

18 Nov. 2009 18:08
#39299
Hi Olof,
You need a smal nut tool for the spark plug:
www.mainjet.de/shop/catalog/advanced_sea...42369844d557&x=0&y=0

at this thread is a picture of the tubes...

dolecek.myphorum.de/XBR/read.php?1,16738,16750#msg-16750

If there are any questions don't mind to ask
mit freundlichen bub bub bub
Johannes

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

18 Nov. 2009 19:20
#39304
Alright!
Thank you very much!
About the tubes, that was a real good picture, but it does'nt say really where they are going.

Like tube number 20, I can see where it connects to the carb, but not where it connects to the other side, or is that not going anywhere?

And number 21, looks like its connected to the gasoline nipple, but I guess it should be to the other one.

When I was working with the bike, the tube that was connected at 21 just went down underneath the bike, so when I tried to pull it out underneath, I grabbed another tube that and that came loose, but I have no clue where it was attatched, it just ended underneath the bike.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

18 Nov. 2009 19:31
#39305
www.flickr.com/photos/44487296@N05/4114814295/

for reference.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 15:49
#39327
olof schrieb:
> When I was working with the bike, the tube that
> was connected at 21 just went down underneath the
> bike, so when I tried to pull it out underneath, I
> grabbed another tube that and that came loose, but
> I have no clue where it was attatched, it just
> ended underneath the bike.

Hej,
a long tube for "A" in your drawning
"B" is for nothing, only on older cabs.
watch here


people who watch the clip should know that i won't apologize for the poor criminal condition the bike looks.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 20:42
#39342
Wow, you shot movie that all for me? Thanks a lot!
Now I get it, thanks.

Just one last question, which of the carb rebuilds kits should be for my 1985 Honda?

www.mainjet.de/shop/catalog/product_info...d2c67f1642369844d557 ?

The have two, and I can't tell which one.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 22:05
#39344
KH-1235N
KH-1268N
which one?

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 22:19
#39345
KH-1235N is the full power (44hp) version.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 23:37
#39346
danke schön meine freunden! (meine deutch ist nich su gut)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

19 Nov. 2009 23:46
#39347
gaahhahahahahah!
They only ship to germany! Argh!

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

20 Nov. 2009 00:03
#39348
Its no problem i think, when it dosent go , i will order that for you and send it to sweden.When you want, send me an PN and were speak about that.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

20 Nov. 2009 08:19
#39349
No, we ship everywhere, but the shop system doesn't is a bit odd, therefore we restricted the countries. You can use a "dummy adress" or just send us a mail.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

20 Nov. 2009 10:05
#39353
Mainjet är en enmansfirma, killen som driver den är aktiv här på forumet, Choice.
Har handlat där ett antal gånger, helt OK, bara skicka ett mail med vad du vill ha.
Har du förgasarstrul så kolla även in Mikuni flatslide förgasaren. (En lämplig hjulklapp?)
/TB

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

23 Nov. 2009 18:17
#39411
Olof, for tube diagrams look in the Service manual or even the GB500 Addendum to the XBR Service manual found under TechNtest, particularly the page:

[ www.dolecek.de/xbrat/gb500/24_27_1.htm ]

and around there. Some alternative RFVC engine manuals might have details missing/not visible in the XBR/GB manuals, the NX650 is handy at times:

[ www.eikholt.net/hpalt/download/NX650%20A...vice%20manual%20.pdf ]

Beware the CA model (carb type VE31A) has one or two more tubes and gadgets, the fiche will aid in explaing which, too.

Då återstår endast ett: Lycka till med ihopbyggnaden :-)

Bluurp, bluurp
Richard Pade, Kopenhagen, DK

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Re: Re: Breather tubes and plug?

23 Nov. 2009 23:23
#39418
Mainjet är en enmansfirma

My Swedish is really bad (even working for a Swedish company), but MainJet is a one woman and half a man company!!

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Ladezeit der Seite: 0.633 Sekunden
Powered by Kunena Forum

Login

Neuste Forumsbeiträge

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.

Akzeptieren Ablehnen
Datenschutz | Impressum